| Metric | Vanax | K390 |
|---|---|---|
| Toughness | 5 | 5.5 |
| Edge Retention | 5.5 | 7.5 |
| Corrosion Resistance | 10 | 4 |
| Avg/Target HRC | 59.5 | 64.1 |
| Manufacturer | Bohler-Uddeholm | Bohler-Uddeholm |
| Category | Stainless | High Alloy Tool Steel |
Vanax vs K390
Vanax vs K390 knife steel comparison using sourced ratings and hardness data from Knife Steel Nerds and SteelHardnessLab.
Quick Take
- Toughness: K390 leads (5.5/10 vs 5/10 for Vanax).
- Edge retention: K390 leads (7.5/10 vs 5.5/10 for Vanax).
- Corrosion resistance: Vanax leads (10/10 vs 4/10 for K390).
Also searched as: Vanax (Vanax SuperClean, Vanax 37)
Also searched as: K390 (Bohler K294, Bohler K390)
FAQ
Is Vanax better than K390 overall?
Toughness: K390 leads (5.5/10 vs 5/10 for Vanax). Edge retention: K390 leads (7.5/10 vs 5.5/10 for Vanax). Corrosion resistance: Vanax leads (10/10 vs 4/10 for K390).
Where do these values come from?
Ratings are attributed to Knife Steel Nerds; hardness measurements are attributed to SteelHardnessLab testing by u/679696 and u/Skylark427.