| Metric | MagnaCut | Vanax |
|---|---|---|
| Toughness | 7 | 5 |
| Edge Retention | 5 | 5.5 |
| Corrosion Resistance | 9.5 | 10 |
| Avg/Target HRC | 62.5 | 59.5 |
| Manufacturer | Crucible Industries | Bohler-Uddeholm |
| Category | Stainless | Stainless |
MagnaCut vs Vanax
MagnaCut vs Vanax knife steel comparison using sourced ratings and hardness data from Knife Steel Nerds and SteelHardnessLab.
Usually compared for saltwater or high-humidity use where corrosion resistance is a top constraint.
Quick Take
- Toughness: MagnaCut leads (7/10 vs 5/10 for Vanax).
- Edge retention: Vanax leads (5.5/10 vs 5/10 for MagnaCut).
- Corrosion resistance: Vanax leads (10/10 vs 9.5/10 for MagnaCut).
Also searched as: MagnaCut (CPM MagnaCut, CPM Magnacut, CPM-MagnaCut, CPM-Magnacut)
Also searched as: Vanax (Vanax SuperClean, Vanax 37)
FAQ
Is MagnaCut better than Vanax overall?
Toughness: MagnaCut leads (7/10 vs 5/10 for Vanax). Edge retention: Vanax leads (5.5/10 vs 5/10 for MagnaCut). Corrosion resistance: Vanax leads (10/10 vs 9.5/10 for MagnaCut).
Where do these values come from?
Ratings are attributed to Knife Steel Nerds; hardness measurements are attributed to SteelHardnessLab testing by u/679696 and u/Skylark427.